.300 AAC Blackout

7.62×35mm / 300 AAC Blackout
The 300 AAC Blackout plastic tipped, left, compared to 300 AAC BLACKOUT 125 gr match, 300 AAC BLACKOUT 220 gr subsonic, 5.56×45mm NATO, and 7.62×39mm.
Type	Rifle
Place of origin	United States
Specifications
Parent case	221 Fireball/.223 Rem
Case type	Rimless, Bottleneck
Bullet diameter	0.308 in (7.8 mm)
Neck diameter	0.335 in (8.5 mm)
Base diameter	0.376 in (9.6 mm)
Rim diameter	0.378 in (9.6 mm)
Case length	1.368 in (34.7 mm)
Overall length	2.26 in (57 mm)
Rifling twist	1:7
Primer type	Small rifle
Maximum pressure (SAAMI)	55,000 psi (380 MPa)
Maximum pressure (CIP)	62,366 psi (430.00 MPa)
Maximum CUP	52000 CUP
Ballistic performance
Bullet mass/type Velocity Energy 125 gr (8 g) OTM 2,215 ft/s (675 m/s) 1,360 ft⋅lbf (1,840 J) 220 gr (14 g) OTM 1,010 ft/s (310 m/s) 498 ft⋅lbf (675 J) 78 gr (5 g) Lehigh Defense CQ 2,800 ft/s (850 m/s) 1,358 ft⋅lbf (1,841 J) 90 gr (6 g) Barnes OTFB 2,550 ft/s (780 m/s) 1,300 ft⋅lbf (1,800 J)
Test barrel length: 16 in Source(s): Official website

300 AAC Blackout, SAAMI short name 300 BLK, also known as 7.62×35mm is a rifle cartridge developed in the United States by Advanced Armament Corporation (AAC) for use in the M4 carbine. Its purpose is to achieve ballistics similar to the 7.62×39mm Soviet cartridge in an AR-15 while using standard AR-15 magazines at their normal capacity. Care should be taken not to use 300 BLK ammunition in a rifle chambered for .223/5.56 or 7.62×40mm Wilson Tactical (see section on misuse).^[1]

While 5.56×45mm NATO has enjoyed widespread acceptance in military circles, the nature of the missions encountered by some special operations groups often demand a round that provides better performance than that available in the high-energy standard velocity rounds and subsonic performance greater than standard 9mm (the ubiquitous pistol round also commonly used in many SMGs).^[2]

In an effort to satisfy this need, the 300 AAC Blackout was developed. It can be seen as a SAAMI-certified version of Jones' Wildcat .300 Whisper. The 300 AAC Blackout was created by Advanced Armament Corporation in cooperation with Remington Defense, under the direction of AAC's Research and Development Director Robert Silvers and with the support of the company's founder, Kevin Brittingham.^[3][4]

Meeting these goals allowed the development team to negate many of the perceived drawbacks inherent to other large caliber cartridges when used in the M4. Colt Firearms and other arms makers had previously chambered AR-pattern rifles and carbines in various .30 caliber rounds but several issues were encountered. In the case of the 7.62×39mm, its relatively severe case angle caused feeding issues unless specially modified AK-47 magazines were used, and even then results were less than outstanding ^{[citation needed]} Modified bolts were also needed owing to its larger case head diameter. Rounds such as the 6.8 SPC and 6.5 Grendel had similar part-interchangeability issues but did allow for the use of the standard M4/M16 30-round magazine albeit with a reduced capacity.^[5]

Wildcat cartridges such as the .300 Whisper series addressed these issues but their widespread use in single shot handguns along with the lack of an industry standard cartridge dimension meant that a great number of the popular loads on both the supersonic and subsonic end of the spectrum were less than ideal in the AR pattern weapons. Many of these rounds required an excessively long overall cartridge length that would prohibit feeding in a STANAG magazine while using powder charges that were not compatible with the pressure requirements of the M4 carbine. This was particularly noticeable when using subsonic ammunition in conjunction with a suppressor as short stroking and excessive fouling would occur similar to that which was seen in the earliest variants of the M16 in Vietnam.^[6]

By keeping the M4/M16 in mind as the primary host during load development the designers were able to work up a host of cartridges that would satisfy not only the ballistic requirements set forth but also ensure mechanical reliability with the fewest changes to the weapon itself, with only a simple barrel change being necessary for a complete conversion.^[7]

300 AAC BLACKOUT was approved by SAAMI on January 17, 2011.

On October 23, 2011, SSG Daniel Horner of the USAMU used 300 AAC Blackout to win his 4th USPSA Multi Gun National Championship.^[8]

In July 2015, the Netherlands' Defense Material Organization issued a tender for 195 carbines chambered in 300 BLK on behalf of the Dutch Maritime Special Operations Force (NL-MARSOF). Plans are to purchase ball, subsonic and lead-free frangible cartridges representing the first formal military adoption of the 300 BLK.^[9]

Maximum estimated Combat effective range = *460 meters (503 yd) 125 grain supersonic. Maximum effective range tested = 800 Meters. The Barnes 110 TAC-TX expands out to 300 Meters from a 9" barrel and is a Law Enforcement and military round with barrier blind capability.^{[citation needed]}

• 200 meters (219 yd) 220 grain subsonic ^{[citation needed]}

The 300 AAC Blackout was designed to achieve energies similar to the 7.62×39mm Soviet in an AR-15 while using standard AR magazines at their full capacity. The 7.62 Soviet's cartridge taper prevented reliable feeding in AR magazines and created wear on the bolt. From the 14.5 in (370 mm) barrel of the M4 Carbine, the M855 5.56×45mm round has an effective point target range of 500 meters. The bullet has significant drop, drift, and energy loss at that distance. From a 16 in (410 mm) barrel, a 125 gr (8.1 g) 300 BLK round has a lower velocity and similar bullet drop and drift at shorter distances. However, it has the same amount of energy at 700 meters that the M855 has at 500 meters. In terms of hit probability, the Blackout has an effective range of 460 meters. From a 9 in (230 mm) barrel, the 125 gr BLK round has the same muzzle energy as the M855 from the M4, and 5 percent more energy at 440 meters. In comparison with 7.62×39mm rounds, 300 BLK rounds with varying loads have a better ballistic coefficient and more energy out of similar length barrels. 300 BLK rounds like the Barnes TAC 110 grain, have "barrier blind" performance, being capable of penetration through several inches of different hard targets. 300 BLK allows a user to have one firearm with the capability of switching between subsonic, supersonic VMAX or barrier penetrating ammunition all with just the change of a magazine. It is able to replace the H&K MP5 for close quarters, and with just a magazine change, bring the fight to longer distances, outperforming the M4 carbine.^{[citation needed]} The .30 caliber cartridge has an 89.1 percent increase in frontal bullet area over the 5.56×45mm, and so leaves a larger wound cavity in soft targets. It also penetrates deeper and initially yaws faster. 300 BLK rounds are effective out of barrels as short as 4.5 in (110 mm). Weapons chambered for the round can be as light, compact, and quiet when suppressed as submachine guns like the 9×19mm Luger MP5 and 4.6×30mm MP7 while having more energy and accuracy at longer range.^[10][11]

Compared to the 6.8×43mm Special Purpose Cartridge, another round made to have increased stopping power over the 5.56 NATO, the 300 Blackout has different capabilities. The 300 BLK was designed with a specific shorter-range focus to have equal or more energy than the 7.62 Soviet and work reliably with suppressors. The earlier 6.8 SPC was simply designed to have more energy at all ranges than the 5.56×45mm. It has a relatively small projectile with a high velocity that maintains performance at range. At 200 yd (183 m), the 300 BLK drops 2 in (51 mm) lower than the 6.8 SPC, while it drops 30 in (760 mm) lower at 500 yd (457 m). The 115 gr (7.5 g) 6.8-round has a higher muzzle energy of 1,694 ft⋅lb (2,297 J) due to its greater velocity, while the 125 gr (8.1 g) 300 BLK round has a muzzle energy of 1,360 ft⋅lb (1,840 J). Both rounds were made to be used in an easily converted AR-15. The 6.8 SPC has a more difficult conversion because it was designed around the .30 Remington AR cartridge, requiring a different bolt and decreasing standard magazine capacity. The 300 BLK was made specifically for ease of conversion, so the standard bolt will work and a magazine can be used to its full capacity, so the only change needed is the barrel.^[12]

The very advantage that the 300 BLK is so similar to the popular .223/5.56 caliber can also be a safety issue if ammunition of the two calibers is mixed. Because of similar chamber dimensions between the two calibers, SAAMI has listed the combination of using a 300 BLK round in a .223 chamber as unsafe.^[1] Since the bullet of the 300 BLK is larger than the bore of the .223 caliber, chambering and firing would cause excessive pressure to build up since the bullet has nowhere to go, which can cause the rifle to explode resulting in risk of injury or death. Since the mix up easily can be done, some suggest owners of firearms in both calibers to carefully separate firearm and ammunition of the two types by for instance clearly marking the firearms and magazines, and visually inspect every round while loading magazines.^[13] Whether a 300 BLK cartridge actually is able to chamber in a .223 barrel depends on bullet length and shape, bullet seating depth, crimping, and the volume of powder charge. Ideally, cartridges would use one of the longer projectiles, a case-filling powder charge, and have the projectile crimped into place.

According to BearingArms.com, two shooters destroyed their rifles, chambered for .223 or 5.56 rounds, by mistakenly using handloaded 300 AAC Blackout cartridges in them.^[14][15]

• Pioneering work by the USAF Armament Lab at Eglin Air Force Base in the late 1960s produced the 7.62×28mm cartridge which propelled a 172 gr match projectile to the 1,050 ft/s (320 m/s) range but suffered from various reliability issues.^[16]
• More recently, popular wildcats such the .300-221, 300 Fireball, and JD Jones' proprietary version of them, the .300 Whisper, have furthered the concept.^[17]

The 300 AAC Blackout is a SAAMI standardized .300-221. Hornady states that any rifle chambered for the 300 AAC Blackout can shoot their .300 Whisper ammunition, which is made within 300 AAC Blackout specs. The reloading dies for these two cartridges are often the same.^[18]

• .277 Wolverine
• .300 Whisper
• 7.62×37mm Musang
• 7.62×40mm Wilson Tactical
• 9×39mm
• List of rifle cartridges
• Table of handgun and rifle cartridges

Wikimedia Commons has media related to 300 AAC Blackout.

• Official website
• SAAMI drawing