comskip.ini

; See comskip.txt in the distribution zip file for many settable parameters, read manual.html, tuning.html and debugwindow.html for how to tune and debug comskip
edl_mode=3                            ; the mode specified in the generated edl file, 0=cut, 3=commercial break
always_keep_first_seconds=0           ; xbmc/vdpau has a bug that causes a segfault if we don't keep the start of the stream, I'll fix that when I get a chance
#detect_method=70                     ; 1=black frame, 2=logo, 4=scene change, 8=resolution change, 16=closed captions, 32=aspect ration, 64=silence, 128=cutscenes, 255=all
validate_silence=1                    ; Default, set to 0 to force using this clues if selected above.
validate_uniform=1                    ; Default, set to 0 to force using this clues (like pure white frames) if blackframe is selected above.
validate_scenechange=1                ; Default, set to 0 to force using this clues if selected above.
verbose=0                             ; show a lot of extra info, level 5 is also OK, set to 0 to disable
max_brightness=60                     ; frame not black if any pixels checked are greater than this (scale 0 to 255)
test_brightness=40                    ; frame not pure black if any pixels checked are greater than this, will check average brightness (scale 0 to 255)
max_avg_brightness=0                  ; maximum average brightness for a dim frame to be considered black (scale 0 to 255) 0 means autosetting
max_commercialbreak=900               ; maximum length in seconds to consider a segment a commercial break
min_commercialbreak=25                ; minimum length in seconds to consider a segment a commercial break
max_commercial_size=125               ; maximum time in seconds for a single commercial or multiple commercials if no breaks in between
min_commercial_size=4                 ; mimimum time in seconds for a single commercial
min_show_segment_length=250           ; any segment longer than this will be scored towards show.
non_uniformity=500                    ; Set to 0 to disable cutpoints based on uniform frames
max_volume=500                        ; any frame with sound volume larger than this will not be regarded as black frame
min_silence=50                        ; Any deep silence longer than this amount  of frames is a possible cutpoint
ticker_tape=5                         ; Amount of pixels from bottom to ignore in all processing
logo_at_bottom=0                      ; Set to 1 to search only for logo at the lower half of the video, do not combine with subtitle setting
punish=31                             ; Compare to average for sum of 1=brightness, 2=uniform 4=volume, 8=silence, 16=schange, set to 0 to disable
punish_threshold=1.3                  ; Multiply when amount is above average * punish_threshold
punish_modifier=5                     ; When above average * threshold multiply score by this value
intelligent_brightness=0              ; Set to 1 to use a USA specific algorithm to tune some of the settings, not adviced outside the USA
logo_percentile=0.92                  ; if more then this amount of logo is found then logo detection will be disabled
logo_threshold=0.775
punish_no_logo=1                      ; Default, set to 0 to avoid show segments without logo to be scored towards commercial
aggressive_logo_rejection=1
connect_blocks_with_logo=1            ; set to 1 if you want successive blocks with logo on the transition to be regarded as connected, set to 0 to disable
logo_filter=0                         ; set the size of the filter to apply to bad logo detection, 4 seems to be a good value.
logo_max_percentage_of_screen=0.9
subtitles=1
cut_on_ar_change=0                    ; set to 1 if you want to cut also on aspect ratio changes when logo is present, set to 2 to force cuts on aspect ratio changes. set to 0 to disable
delete_show_after_last_commercial=1   ; set to 1 if you want to delete the last block if its a show and after a commercial
delete_show_before_or_after_current=1 ; set to 1 if you want to delete the previous and the next show in the recording, this can lead to the deletion of trailers of next show
delete_block_after_commercial=0       ;set to max size of block in seconds to be discarded, set to 0 to disable
remove_before=0                       ; amount of seconds of show to be removed before ALL commercials
remove_after=0                        ; amount of seconds of show to be removed after ALL commercials
shrink_logo=0                         ; Reduce the duration of the logo with this amount of seconds
after_logo=0                          ; set to number of seconds after logo disappears comskip should start to search for silence to insert an additional cutpoint
padding=0
ms_audio_delay=5
volume_slip=40
skip_b_frames=0                       ; Set to 1 to force Comskip to skip frames for higher processing speed.
max_repair_size=0                     ; Will repair maximum 200 missing MPEG frames in the timeline, set to 0 to disable repairing for players that don't use PTS.
disable_heuristics=0                  ; bit pattern for disabling heuristics, adding 1 disables heristics 1, adding 2 disables heristics 2, adding 4 disables heristics 3, 255  disables all heuristics
delete_logo_file=1                    ; set to 1 if you want comskip to tidy up after finishing
thread_count=4
hardware_decode=1                     ; Set to 1 to enable hardware accelerated video decoding, only available in donator version
output_framearray=0                   ; create a big excel file for detailed analysis, set to 0 to disable
output_data=0                         ; create a dump of the user data channel, used for CC and XDS (such as V-Chip info). Can be use together with output_framearray to remote debug CC decoding
output_videoredo=0                    ; The old videoredo format
output_videoredo3=0                   ; The new videoredo v3 format.
output_womble=0
output_mls=0                          ; set to 1 if you want MPeg Video Wizard bookmark file output
output_cuttermaran=0
output_mpeg2schnitt=0
output_mpgtx=0
output_dvrcut=0
output_zoomplayer_chapter=0
output_zoomplayer_cutlist=0
output_edl=0
output_dvrmstb=0                      ; Set to 1 if you're running DVRMS-Toolbox
output_edlx=0
output_vcf=0
output_bsplayer=0
output_btv=0                          ; set to 1 if you want Beyond TV chapter cutlist output
output_projectx=0                     ; set to 1 if you want ProjectX cutlist output (Xcl)
output_avisynth=0
output_mkvtoolnix=1
output_vdr=0                          ; set to 1 if you want XBMC to skipping commercials
output_demux=0                        ; set to 1 if you want comskip to demux the mpeg file while scanning
sage_framenumber_bug=0
sage_minute_bug=0
live_tv=0                             ; set to 1 if you use parallelprocessing and need the output while recording
live_tv_retries=4                     ; change to 16 when using live_tv in BTV, used for mpeg PS and TS
dvrms_live_tv_retries=300             ; only used for dvr_ms
standoff=0                            ; change to 8000000 when using live_tv in BTV