Exhaustive ballot

In each round of an exhaustive ballot the voter simply marks an 'x' beside his or her favourite candidate. If no candidate has an absolute majority of votes (i.e., more than half) in the first round, then the candidate with the fewest votes is eliminated while all other candidates advance to a second round. If there is still no candidate with a majority then the candidate with the fewest votes is again eliminated and there is a third round. The process repeats itself for as many rounds as are necessary for one candidate to achieve a majority. If necessary, the election will continue until only two candidates remain. When this occurs one of the two must achieve an absolute majority provided there are an odd number of valid votes cast.

Between rounds, the voter is entirely free to change their preferred candidate for whatever reason, even if their preferred candidate has not yet been eliminated from voting.

• It is possible to impose a larger number of votes to win, such as a two thirds vote, on either all rounds or on the beginning rounds. For example, on the first several rounds of the election of the President of Italy, a supermajority is required to win, dropping to a majority on the fourth and subsequent ballots.
• Under some variants of the exhaustive ballot there is no formal rule for eliminating candidates from one round to another; rather, candidates are expected to withdraw voluntarily.
• Some variations slowly raise an elimination threshold in to encourage compromise. For example, the Minnesota Democratic-Farmer-Labor Party for U.S. Senate endorsement 2008 used an exhaustive ballot with a dropoff rule starting at 5% and increasing to 25% after round 5, after which one candidate with the lowest votes was eliminated per round until no more than two remained.^[1]
• There are also variants which exclude more than one candidate at a time. For example, in elections for the speakers of the Canadian and British Houses of Commons any candidate with fewer than 5% of all votes in the first round is immediately eliminated.

Suppose that Tennessee is holding an election on the location of its capital. The population is concentrated around four major cities. All voters want the capital to be as close to them as possible. The options are:

• Memphis, the largest city, but far from the others (42% of voters)
• Nashville, near the center of the state (26% of voters)
• Chattanooga, somewhat east (15% of voters)
• Knoxville, far to the northeast (17% of voters)

The preferences of each region's voters are:

Round 1. In the first round of voting everybody votes for their own city:

• Memphis: 42%
• Nashville: 26%
• Knoxville: 17%
• Chattanooga: 15%

Round 2. No candidate has a majority in the first round, so Chattanooga (with the fewest votes) is eliminated and the remaining three candidates proceed to Round 2. In this round the Chattanooga supporters vote instead for Knoxville, the next-closest city to their own. None of the other voters need to change their votes. The results are therefore:

• Memphis: 42%
• Knoxville: 32%
• Nashville: 26%

Round 3. Nashville is now eliminated, so that only two candidates remain for the final round. The Nashville supporters change their vote to Knoxville, the next nearest city to their own. The result of the third round is therefore:

• Knoxville: 58%
• Memphis: 42%

Result: After round three Knoxville has an absolute majority so is the winner.

• Scottish government: The First Minister, and the Presiding Officer and Deputy Presiding Officers of the Scottish Parliament are elected by the exhaustive ballot method.^[2]
• The host city of the Olympic Games is chosen by an exhaustive ballot of members of the International Olympic Committee. Members from a country which has a city competing in the election are forbidden from voting unless the city has been eliminated.
• The President of the European Parliament is elected by all members of the body to be its "speaker" or chairperson. In the election if no candidate receives an absolute majority in the first round then there are up to three more rounds. In the second and third rounds anyone who wants to is free to stand, but candidates who perform poorly sometimes withdraw to help others be elected. If no-one achieves an absolute majority in the third round then only the two candidates with most votes are allowed to proceed to the fourth and final round of voting.^[3]
• The Speaker of the House of Commons is elected by secret ballot by members of the house. If no candidate achieves an absolute majority in the first round then the candidate with fewest votes and any other candidate who has received less than 5% of all votes is immediately eliminated. Subsequent rounds proceed according to the ordinary rules of the exhaustive ballot.^[2]
• The Speaker of the House of Commons of Canada is elected under essentially the same variant of the exhaustive ballot used for the British counterpart, with candidates on less than 5% in the first round immediately excluded.^[2]
• The Leader of the New Democratic Party of Canada is elected by the party membership under a mixture of instant runoff voting (IRV), and exhaustive voting, depending on the member's preferences. Those who want to vote only once may cast a single ballot filled out in the IRV format, while other members may cast separate ballots after each round of balloting. The party used this format for the 2012, and 2017 leadership elections.
• Candidates to lead the UK Conservative Party are shortlisted by an exhaustive ballot of elected MPs until only two candidates remain. The final two candidates then enter a ballot of the party membership to select the leader.
• The Leader of the Labour Party of New Zealand is elected by an exhaustive ballot of elected MPs; candidate needs two-thirds vote to be elected. If two candidates remain and neither has two-thirds vote, an electoral college made up of MPs, party members and affiliated unions will vote via simple majority.^[4]
• The President of South Africa is elected by exhaustive ballot by members of the National Assembly.^[5]

As noted above the exhaustive ballot is similar to the two-round system. However under the two-round system if no candidate achieves an absolute majority in the first round then, rather than just a single candidate being eliminated, all candidates are immediately excluded except the two with the most votes. There is then a second and final round. Because, at most, it requires voters to return to the polls only once, the two-round system is considered more practical for large public elections than the exhaustive ballot, and is used in many countries for the election of presidents and legislative bodies. However the two systems often produce different winners. This is because, under the two-round system, a candidate may be eliminated in the first round who would have gone on to win the contest if they had been permitted to survive to the second round. In the example above, the two round system would have selected Nashville instead of Knoxville.

A nonpartisan primary election system is a variation of the two-round system which holds a pre-election, and allows the top two candidates to pass to the general election. It generally differs from the two-round system in two ways: (1) the first election is not allowed to pick a winner, and (2) political parties are not allowed to limit their field using a convention or caucus.

In some respects the exhaustive ballot closely resembles instant-runoff voting (also known as the "Alternative Vote"). Under both systems if no candidate has an absolute majority in the first round then there are further rounds, with the candidate with the fewest votes being eliminated after each round. However while under the exhaustive ballot each round involves voters returning to cast a new vote, under instant-runoff, voters vote only once. This is possible because, rather than voting for only a single candidate, the voter ranks all of the candidates in order of preference. These preferences are then used to "transfer" the votes of those whose first preference has been eliminated during the course of the count.

Because the exhaustive ballot involves separate rounds of voting, voters can use the results of one round to inform how they will vote in the next, whereas this is not possible under IRV. Furthermore, because it is necessary to vote only once, instant-runoff voting has been used for large-scale elections in many places.

Like instant-runoff voting, the exhaustive ballot is intended to improve upon the simpler "first-past-the-post" (plurality) system by reducing the potential for tactical voting by avoiding "wasted" votes. Under the plurality system, which involves only one round, voters are encouraged to vote tactically by voting for only one of the two leading candidates, because a vote for any other candidate will not affect the result.^{[citation needed]} Under the exhaustive ballot this tactic, known as "compromising", is sometimes unnecessary because, even if the voter's first choice is unlikely to be elected, she will still have the opportunity to influence the outcome of the election by voting for more popular candidates once her favourite has been eliminated. However the exhaustive ballot is still vulnerable to tactical voting under some circumstances. Because of the similarity between the two systems it is open to the same forms of tactical voting as instant-runoff voting, as described below.

Although the exhaustive ballot is designed to avoid "compromising" the tactic is still effective in some elections. Compromising is where a voter votes for a certain candidate, not because they necessarily support them, but as a way of avoiding the election of a candidate whom they dislike even more. The compromising tactic is sometimes effective because the exhaustive ballot eliminates candidates who are unpopular in early rounds, who might have had sufficient support to win the election had they survived a little longer. This can create strong incentives for voters to vote tactically.

The exhaustive ballot is also vulnerable to the tactic of "push over", where voters vote tactically for an unpopular "push over" candidate in one round as a way of helping their true favourite candidate win in a later round. The purpose of voting for the "push over" is to ensure that it is this weak candidate, rather than a stronger rival, who remains to challenge a voter's preferred candidate in later rounds. By supporting a "push over" candidate it is hoped to eliminate a stronger candidate who might have gone on to win the election.^{[citation needed]} The "push over" tactic requires voters to be able to reliably predict how others will vote. It runs the risk of backfiring, because if the tactical voter miscalculates then the candidate intended as a "push over " might end up actually beating the voter's preferred candidate. Instant-runoff voting is less susceptible to this tactic, as voters cannot change their first preference in successive rounds. Once a voter has chosen a push over as their preferred candidate, it will remain so until this candidate is eliminated, increasing the likelihood of the push over getting elected at the expense of the preferred candidate.

In the example above Knoxville wins, the last choice of both Nashville and Memphis supporters. If Memphis supporters had compromised by voting for Nashville (their second choice) in the first round then Nashville would have been elected immediately, while if Nashville supporters had all compromised by voting for their second choice of Chattanooga in the first round, then Chattanooga would have gone on to be elected in the second round.

Imagine an election in which there are 100 voters who vote as follows:

• Ice Cream: 25 votes
• Apple Pie: 30 votes
• Fruit: 45 votes

No candidate has an absolute majority of votes so Ice Cream is eliminated in the first round. Ice Cream supporters prefer Apple Pie to Fruit so in the second round they vote for Apple Pie and Apple Pie is the winner. However, if only six Fruit supporters had used the tactic of "push over" then they could have changed this outcome and ensured the election of Fruit. These six voters can do this by voting for Ice Cream in the first round as a "push over". If they do this then the votes cast in the first round will look like this:

• Ice Cream: 31
• Apple Pie: 30
• Fruit: 39

This time Apple Pie is eliminated in the first round and Ice Cream and Fruit survive to the second round. This outcome is deliberate. The tactical voters know that Ice Cream will be an easier candidate for Fruit to beat in the second round than Apple Pie—in other words, that Ice Cream will be a "push-over". In the second round the tactical voters vote for their real first preference, Fruit. Therefore, even if only six Apple Pie supporters prefer Fruit to Ice Cream, the result of the second round will be:

• Ice Cream: 49
• Fruit: 51

Fruit will therefore be elected. The success of this tactic relies on the Fruit supporters being able to predict that Ice Cream can be beaten by Fruit in the second round. If a large majority of Apple Pie supporters had voted for Ice Cream then the "push over" tactic would have backfired, leading to the election of Ice Cream, which Fruit partisans like even less than Apple Pie.

The exhaustive ballot can also be influenced by strategic nomination; this is where candidates and political factions influence the result of an election by either nominating extra candidates or withdrawing a candidate who would otherwise have stood. The exhaustive ballot is vulnerable to strategic nomination for the same reasons that it is open to the voting tactic of "compromising". This is because a candidate who knows they are unlikely to win can bring about the election of a more desirable compromise candidate by withdrawing from the race, or by never standing in the first place. By the same token a candidate can bring about a less desirable result by unwisely choosing to stand in an election; this is because of the spoiler effect, by which a new candidate can "split the vote" and cost another similar candidate the election.

The exhaustive vote's system of multiple rounds makes it less vulnerable to the spoiler effect than the plurality system or the two round system. This is because a potential spoiler candidate often has only minor support; therefore he will be eliminated early and his supporters will have the opportunity to influence the result of the election by voting for more popular candidates in later rounds. Voters can also counteract the effect of vote splitting by using the "compromise" tactic.

The exhaustive vote is essentially vulnerable to the same forms of strategic nomination as instant-runoff voting, the difference being that under the exhaustive vote candidates can use the results of early rounds to inform whether or not they should strategically withdraw in later rounds. This is impossible under IRV. In IRV the electorate votes only once, so candidates must make the judgement of whether or not to participate in an election before the poll, and before even one round of counting has occurred.

The exhaustive ballot encourages candidates to appeal to a broad cross-section of voters. This is because, in order to eventually receive an absolute majority of votes, it is necessary for a candidate to win the support of voters whose favourite candidate has been eliminated. Under the exhaustive ballot, eliminated candidates, and the factions who previously supported them, often issue recommendations to their supporters as to whom they should vote for in the remaining rounds of the contest. This means that eliminated candidates are still able to influence the result of the election.

• Electoral Reform Society: Briefing on the electoral system for the Speaker of the British House of Commons