Linux kernel driver to export the TSC frequency via sysfs

This library enables you to use RTC from RP2040-based boards such as Nano_RP2040_Connect, RASPBERRY_PI_PICO. This RP2040-based RTC, using Interrupt, has no battery backup. Time will be lost when powered down. To need NTP-client to update RTC every start-up.

This library enables you to use Interrupt from Hardware Timers on an ESP32, ESP32_S2 or ESP32_C3-based board to create and output PWM to pins. It now supports 16 ISR-based synchronized PWM channels, while consuming only 1 Hardware Timer. PWM interval can be very long (uint32_t millisecs). The most important feature is they're ISR-based PWM chann…

This library enables you to use 1 Hardware Timer on RP2040-based board, such as Nano_RP2040_Connect, RASPBERRY_PI_PICO, to control up to 16 or more servo motors. Now permitting using servos with different pulse ranges simultaneously.

This library enables you to use Interrupt from Hardware Timers on an STM32H7-based Portenta_H7 board. It now supports 16 ISR-based timers, while consuming only 1 Hardware Timer. Timers' interval is very long (ulong millisecs). The most important feature is they're ISR-based timers. Therefore, their executions are not blocked by bad-behaving func…

This library enables you to use 1 Hardware Timer on an ESP8266-based board to control up to 16 servo motors.

This library enables you to use ISR-based PWM channels on AVR-based boards, such as Mega-2560, UNO,Nano, Leonardo, etc., to create and output PWM any GPIO pin. It now supports 16 ISR-based PWM channels, while consuming only 1 Hardware Timer. PWM channel interval can be very long (ulong microsecs / millisecs). The most important feature is they'r…

This library enables you to use ISR-based PWM channels on RP2040-based boards, such as ADAFRUIT_FEATHER_RP2040, RASPBERRY_PI_PICO, with arduino-pico core to create and output PWM any GPIO pin. The most important feature is they're ISR-based PWM channels, supporting lower PWM frequencies with suitable accuracy. Their executions are not blocked by…

This library enables you to use Hardware Timers on an STM32H7-based Portenta_H7 board to create and output PWM to pins. These PWM channels, using Portenta_H7 Hardware Timers, still work even if other functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other software or ISR-based PWM…

This library enables you to use Hardware Timers on RP2040-based RP2040 board to create and output PWM to pins. These PWM channels, using RP2040 Hardware-PWM channels, still work even if other functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other software ISR-based PWM, using mil…

This library enables you to use ISR-based PWM channels on Teensy boards, such as Teensy 2.x, Teensy LC, Teensy 3.x, Teensy 4.x, Teensy MicroMod, etc., to create and output PWM any GPIO pin. It now supports 16 ISR-based PWM channels, while consuming only 1 Hardware Timer. PWM channel interval can be very long (ulong microsecs / millisecs). The mo…

This library enables you to use 1 Hardware Timer on an STM32F/L/H/G/WB/MP1-based board to control 16 or more servo motors.

This library enables you to use Hardware Timers on nRF52840-based Nano_33_BLE or Nano_33_BLE_Sense board to create and output PWM to pins. These PWM channels, using nRF52840 Hardware Timers, still work even if other functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other software …

This library enables you to use Hardware Timers on SAMD21/SAMD51 boards to create and output PWM to pins. These PWM channels, using SAMD21/SAMD51 Hardware Timers, still work even if other functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other software timers using millis() or mic…

This library enables you to use ISR-based PWM channels on RP2040-based boards, such as Nano_RP2040_Connect, RASPBERRY_PI_PICO, with Arduino-mbed (mbed_nano or mbed_rp2040) core to create and output PWM any GPIO pin. The most important feature is they're ISR-based PWM channels, supporting lower PWM frequencies with suitable accuracy. Their execut…

This library enables you to use 1 Hardware Timer on an ESP32_S2-based board to control up to 16 or more servo motors. Tested OK with ESP32 core v2.0.5

This library enables you to use Hardware Timers on STM32F/L/H/G/WB/MP1 boards to create and output PWM to pins. The most important feature is they're purely hardware-based PWM channels. Therefore, their executions are not blocked by bad-behaving functions or tasks. This important feature is absolutely necessary for mission-critical tasks. These …

This library enables you to use 1 Hardware PWM module on nRF52832/nRF52840-based board, such as AdaFruit Feather nRF52832, nRF52840 Express, Itsy-Bitsy nRF52840 Express, etc. to control up to 16 or more servo motors.

This library enables you to use 1 Hardware Timer on SAMD21/SAMD51-based board, such as Nano-33-IoT, Seeeduino XIAO, Adafruit Itsy-Bitsy M4, etc. to control up to 16 or more servo motors.

This library enables you to use Hardware Timers on an STM32H7-based Portenta_H7 board to create and output PWM to pins. It now supports 16 ISR-based PWM-channels, while consuming only 1 Hardware Timer. They are much more precise (certainly depending on clock frequency accuracy) than other software PWM using millis() or micros(). That's mandatory…