Pages that link to "Q21165108"

The following pages link to Peter Cawley (Q21165108):

Displaying 50 items.

• The application of synthetic focusing for imaging crack-like defects in pipelines using guided waves. (Q43711797) (← links)
• The scattering of guided waves in partly embedded cylindrical structures. (Q44375374) (← links)
• A Stiffness Reduction Method for efficient absorption of waves at boundaries for use in commercial Finite Element codes. (Q44551218) (← links)
• Cure monitoring using ultrasonic guided waves in wires (Q44599418) (← links)
• A single probe spatial averaging technique for guided waves and its application to surface wave rail inspection. (Q50140370) (← links)
• The scattering of torsional guided waves from Gaussian rough surfaces in pipework. (Q50933185) (← links)
• Investigation of guided wave propagation in pipes fully and partially embedded in concrete (Q51063419) (← links)
• Data fusion for automated non-destructive inspection. (Q51069236) (← links)
• On the development and testing of a guided ultrasonic wave array for structural integrity monitoring (Q51226106) (← links)
• The excitation and detection of lamb waves with planar coil electromagnetic acoustic transducers. (Q51275394) (← links)
• Omnidirectional guided wave inspection of large metallic plate structures using an EMAT array. (Q51382536) (← links)
• Efficient generation of receiver operating characteristics for the evaluation of damage detection in practical structural health monitoring applications. (Q51564400) (← links)
• Measurement of the material properties of viscous liquids using ultrasonic guided waves. (Q51649798) (← links)
• Ultrasonic interferometry for the measurement of shear velocity and attenuation in viscoelastic solids. (Q51716470) (← links)
• Evaluation of the damage detection capability of a sparse-array guided-wave SHM system applied to a complex structure under varying thermal conditions. (Q51763246) (← links)
• (Q51763373) (redirect page) (← links)
• The reflection of the fundamental torsional mode from cracks and notches in pipes. (Q51831492) (← links)
• Attenuation characteristics of the fundamental modes that propagate in buried iron water pipes. (Q51836443) (← links)
• Quantitative modeling of the transduction of electromagnetic acoustic transducers operating on ferromagnetic media. (Q53077905) (← links)
• Mode selection for corrosion detection in pipes and vessels via guided wave tomography. (Q54267779) (← links)
• Ultrasonic Determination of the Cohesive Properties of Bonded Joints by Measurement of Reflection Coefficient and Bondline Transit Time (Q56963303) (← links)
• Errors in mechanical impedance data obtained with impedance heads (Q57926041) (← links)
• The detection of defects in GRP lattice structures by vibration measurements (Q57929007) (← links)
• Interaction between SH0 guided waves and tilted surface-breaking cracks in plates (Q58596956) (← links)
• Feasibility and Reliability of Grain Noise Suppression in Monitoring of Highly Scattering Materials. (Q59614186) (← links)
• Study and comparison of different EMAT configurations for SH wave inspection. (Q64882610) (← links)
• The low frequency reflection characteristics of the fundamental antisymmetric Lamb wave a0 from a rectangular notch in a plate. (Q64991910) (← links)
• Scattering of the fundamental shear horizontal mode from steps and notches in plates (Q73291837) (← links)
• Design and construction of a low frequency wide band non-resonant transducer (Q73342609) (← links)
• Design of a self-calibrating simulated acoustic emission source (Q73597664) (← links)
• The low-frequency reflection and scattering of the S0 Lamb mode from a circular through-thickness hole in a plate: Finite Element, analytical and experimental studies (Q78737480) (← links)
• The interaction of Lamb waves with defects (Q80680738) (← links)
• Scattering of the fundamental shear horizontal mode in a plate when incident at a through crack aligned in the propagation direction of the mode (Q82785950) (← links)
• High-temperature (>500°c) wall thickness monitoring using dry-coupled ultrasonic waveguide transducers (Q83230400) (← links)
• The reflection of guided waves from simple supports in pipes (Q83813798) (← links)
• Development of a low-frequency high purity A0 mode transducer for SHM applications (Q84161185) (← links)
• Guided wave diffraction tomography within the born approximation (Q84367389) (← links)
• The scattering of the fundamental torsional mode from axi-symmetric defects with varying depth profile in pipes (Q84410872) (← links)
• Low-frequency pulse echo reflection of the fundamental shear horizontal mode from part-thickness elliptical defects in plates (Q84410888) (← links)
• Excitation of Single-Mode Lamb Waves at High-Frequency-Thickness Products (Q86941241) (← links)
• Relative Ability of Wedge-Coupled Piezoelectric and Meander Coil EMAT Probes to Generate Single-Mode Lamb Waves (Q88248289) (← links)
• Location Specific Temperature Compensation of Guided Wave Signals in Structural Health Monitoring (Q90078638) (← links)
• Investigation of ultrasonic backscatter using three-dimensional finite element simulations (Q91859357) (← links)
• Scattering of the Fundamental Shear Guided Wave From a Surface-Breaking Crack in Plate-Like Structures (Q92412436) (← links)
• Fusion of multi-view ultrasonic data for increased detection performance in non-destructive evaluation (Q104574371) (← links)
• A study of the transmission of ultrasound across solid–rubber interfaces (Q108430952) (← links)
• The Interaction of Ultrasound with a Partially Contacting Solid-Solid Interface in the Low Frequency Regime (Q108430954) (← links)
• A Study of the Transmission of Ultrasound Across Real Rough Solid-Solid Interfaces (Q108430960) (← links)
• Guided wave testing of rail (Q108447509) (← links)
• The effect of dispersion on long-range inspection using ultrasonic guided waves (Q108447514) (← links)